You can trust our compilation of Exhaust Pipe Bender Reviews. Because we have worked very hard searching and analyzing 51755 reviews for Exhaust Pipe Bender and giving them perfect rating. It was a tough task to list only ten top quality products for Exhaust Pipe Bender where thousands are available online. I hope this guideline will help you to take a calculated decision for Best Exhaust Pipe Bender.

No | Product | Score | Action |
---|---|---|---|
1 | W4-Moto 12 Ton Heavy Duty Hydraulic Tube Bender 180 Degree Tubing Metal Steel Iron Exhaust Pipe Bending with 6 Dies Sets 1/2" | 9.8 | Check on Amazon |
2 | Walker 40295 Exhaust Y-Pipe | 9.6 | Check on Amazon |
3 | Lisle 17350 Pipe Stretcher Kit | 9.4 | Check on Amazon |
4 | DNA Motoring ZTL-25RAW 16 Pcs 2.5 Inches Mild Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit | 9.2 | Check on Amazon |
5 | SWAG Off Road Formed Tubing Bender Air/Hydraulic Ram Mount (Un-Welded) JD2 Model 32 | 9 | Check on Amazon |
6 | JEGS 16-Ton Hydraulic Pipe Bender - Bends 1/2 “ to 3” Outside Diameter Pipe - Bends Thick-Walled Schedule 40 | 8.8 | Check on Amazon |
7 | Woodward Fab Tube and Pipe Bender | 8.6 | Check on Amazon |
8 | Happybuy 12 Ton Exhaust Tubing Bender 1/2 Inch Square Hydraulic Hand Pump Tubing Bender Stroke 130mm Pipe Bending Tool within 90-180 Degree Steel Pipe Bender with 6 Dies | 8.2 | Check on Amazon |
9 | Happybuy Pipe Tube Bender | 8.2 | Check on Amazon |
10 | Baileigh RDB-050 Manual Tube Bender | 8.2 | Check on Amazon |
Comparison Table for Best Exhaust Pipe Bender
We’ve gone through 51755 reviews to select the best products for you. If you are finding the Exhaust Pipe Bender then this review article will guide you towards that.
Table Of Content:
- W4-Moto 12 Ton Heavy Duty Hydraulic Tube Bender 180 Degree Tubing Metal Steel Iron Exhaust Pipe Bending...
- Walker 40295 Exhaust Y-Pipe
- Lisle 17350 Pipe Stretcher Kit
- DNA Motoring ZTL-25RAW 16 Pcs 2.5 Inches Mild Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight...
- SWAG Off Road Formed Tubing Bender Air/Hydraulic Ram Mount Un-Welded JD2 Model 32
- JEGS 16-Ton Hydraulic Pipe Bender | Bends 1/2 “ to 3” Outside Diameter Pipe | Bends Thick-Walled Schedule...
- Woodward Fab Tube and Pipe Bender, Model# WFB2
- Happybuy 12 Ton Exhaust Tubing Bender 1/2 Inch Square Hydraulic Hand Pump Tubing Bender Stroke 130mm Pipe...
- Happybuy Pipe Tube Bender
- Baileigh RDB-050 Manual Tube Bender
1. W4-Moto 12 Ton Heavy Duty Hydraulic Tube Bender 180 Degree Tubing Metal Steel Iron Exhaust Pipe Bending with 6 Dies Sets 1/2″
- Stable Base & Solid Structure】Made of premium steel, this tube bender is heavy duty to hold up to 12 ton weight capacity.
- 6 Adjustable Roller Levels 6 Dies】Bending bars can easily be adjusted to distances of 8-1/2″, 11-1/4″, 12″, 16-3/4″, 19-1/2″ and 22-1/2″, so you can adjust the top rollers for degree of bend to meet the bending angle of the tube.
- 180 Degree Bending】Compared to other bender that only can bend tube to 90 degree angle, our pipe bender can bend tubing to angles up to 180 degrees smoothly so that reduce your workload and increase working efficiency.
- Great Material】Material of premium steel, this tube bender is heavy duty to hold up to 12 ton weight capacity.
- Free Shipping】US stock, fast shipping.
2. Walker 40295 Exhaust Y-Pipe
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable).
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment.
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade.
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.
3. Lisle 17350 Pipe Stretcher Kit
- Stretches Pipe up to 4-1/4″ Including Stainless Steel.
- Use with an impact wrench to quickly stretch pipes.
- Collet sets expand pipes from 1-5/8″ to 4-1/4″.
- The tool can be used on the vehicle.
- The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders.
- Comes in a molded storage case.
4. DNA Motoring ZTL-25RAW 16 Pcs 2.5 Inches Mild Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit
- Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 2.5″ OD
- Easy To Use: Slip Fit Joints to Provide Easiest Fabrication
- Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
- Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.
- DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
5. SWAG Off Road Formed Tubing Bender Air/Hydraulic Ram Mount (Un-Welded) JD2 Model 32
- Made in the USA
- This kit is designed out of pure necessity and built to be the best kit out on the market.
- This air/hydraulic ram mount fits the following tubenders JD2 Model 32 only.
- This ram mount works with the Harbor Freight 8 ton long ram PN #56215 ram ONLY.
6. JEGS 16-Ton Hydraulic Pipe Bender - Bends 1/2 “ to 3” Outside Diameter Pipe - Bends Thick-Walled Schedule 40
- NO ASSEMBLY REQUIRED for quick and easy setup
- GREAT TOOL FOR do-it-yourself projects at home or in the shop
- OVERALL DIMENSIONS: 25” long x 5 1/2 “ wide x 22 1/2 “ high (base: 12” long, top: 25” long).
- INCLUDES (1) pipe bender frame assembly, (1) 16-ton hydraulic cylinder, (1) pump handle bar, (8) bending dies ( 1/2 in.
- SPECIAL NOTE: will not bend thin-walled pipe, conduit or exhaust pipe.
8. Happybuy 12 Ton Exhaust Tubing Bender 1/2 Inch Square Hydraulic Hand Pump Tubing Bender Stroke 130mm Pipe Bending Tool within 90-180 Degree Steel Pipe Bender with 6 Dies
- 12 T Pipe Bender: Our tube bender holds up to 12 ton weight capacity.
- 1/2″-2″ Bending Range: The hydraulic pipe bender comes with six dies of 1/2″, 3/4″, 1″, 1-1/4″, 1-1/12″ and 2″, available to meet your proper uses.
- 90° -180° Bending Angle: This exhaust tubing bender allows tubes to be bent within 90-180 degrees, reducing your workload and increasing working efficiency (no more than 180 degrees).
- Effortless Operation: Our product with hydraulic system is labor-saving.
- Wide Application: Exhaust pipe bender can be used in power construction, road building, bridges pipeline laying or repairing, shipbuilding, chemical, plumbing, and other industries.
9. Happybuy Pipe Tube Bender
- Wall thickness of pipe: 0.
- External diameter of half circle: 100mm,119mm,139mm,159mm,179mm,225mm,225mm
- Longer handle for labor saving; variety measures of bending molds and formers; easy operation and convenient mantainance.
- This pipe tube bender has 7 dies inside can be utilized for customizing brackets and supporting other parts on the working field.
- The manual tube bender is widely used to metal pipe, stainless steel pipe, wire pipe, circle-steel pipe and low-pressure liquid jointing pipe.
10. Baileigh RDB-050 Manual Tube Bender
- REVOLUTIONARY DESIGN: Can bend 2-inch OD chromalloy or 2.5-inch OD mild steel.
- 3 BENDING SPEEDS: 4, 8, or 12 degrees per pull.
- FAST CHANGEOVERS: Quick-release hook arm inserts assist when you’re changing over the machine to a different size of tubing.
- NO NEED TO RESET: Bends up to 200 degrees in one shot, no need to stop and reset the machine.
- ANTI-SPRINGBACK MECHANISM: Holds each bend in place as the operator ratchets forward.
- First, our algorithms have collected information available about these products from various sources.
- We employed both AI and big data volume to collect and validate all the information.
- Then our intelligent AI ranked the products on their quality-to-price ratio through using the industry-standard criteria and let us pick the best Exhaust Pipe Bender currently available on the market!
- Brand Value: What happens actually when you select a not-so-reputable manufacturing brand just because the product price seems cheap? Well, in that case, the chance of having a short-lasting item goes higher. That’s because those renowned manufacturing brands try to maintain their quality, while others don’t.
- Features: You don’t need a lots of features, but only useful ones. We look at those features that actually matter and thus choose the top Exhaust Pipe Bender based on that.
- Specifications: Numbers may help you measure only the quality of a product in just a quantitative way. That’s why we try to find products having higher specifications, but of course with the right balance.
- Customer Ratings: The hundreds of real customers using the Exhaust Pipe Bender before you won’t misguide you, would they? Better ratings mean that better service were experienced by a lot of people.
- Customer Reviews: Like the ratings, customer reviews also give you the actual and on field information, only coming from the real-world consumers about the Exhaust Pipe Bender they used.
- Seller Rank: Now, this is very interesting! You don’t just need a good Exhaust Pipe Bender, you need a quality product that is not only trendy and but also growing in sales. It may serve you two objectives. First one, the growing number of actual buyers indicates that the product is really good. Secondly, the manufacturers may provide better product quality and also after-sales service as they are selling a lot.
- Value For The Money: They always say that you get what you pay for. Cheap items aren’t always good. But that doesn’t mean you have to splash tons of money on a fancy and underserving product. We try to understand the value for the money you may get from your Exhaust Pipe Bender before you put them on the list.
- Durability: Durability and reliability of a product go hand in hand. A sturdy and durable Exhaust Pipe Bender will serve the consumer for months and sometimes years to come.
- Availability: Products may come and go, but new products always take the place of the old products. Maybe some new features were added, or some modifications were done. What’s the point of having a good Exhaust Pipe Bender if it is not continued by the manufacturer? We try include products that are kept up-to-date and also sold by reliable sellers.
- Negative Ratings: Yes, we also take negative ratings into consideration! When we choose the quality top rated Exhaust Pipe Bender from the market, the products that have got many negative ratings are filtered and separated.

Noah is a tool expert and DIY enthusiast. He loves to make things with his tool. Doing household repairing and having a good time is a huge motivation for him.