Save Big and Grab Special Offers From  Amazon Prime Day

How to Wear a Tool Belt: 10 Proper Steps of Wearing a Tool Belt!

Last Updated on March 9, 2021

After buying your tool belt set, it’s time to know how to wear a tool belt. If you fail to put on the tool belt correctly, it will make discomfort and pain in your waist and hips, as a result of that, your work efficiency will be affected. In the case of lots of tool carrying, suspenders are essential. So, you also need to know the process of accumulating suspenders with the tool belt.

Check This Out
Check today’s  Deals on Tools!

Not, all the techniques of wearing a tool belt aren’t easy and effective equally. Researching a lot, we have come with the most appropriate tips for tool belt wearing. These methods will educate you and grow your skills extremely. Let’s know the proper ways of wearing your tool belt and suspenders!

Complete Guide Of How to Wear a Tool Belt and Suspenders

How to Wear a Tool BeltBy following a few steps, you can easily put on the tool belts and suspenders without any hassle. Before that, you need to know the advantages of tool belts wearing first.

Benefits of Wearing Tool Belts

Tool belts are extremely useful components for tool carriers. They make the tool organizing process easier and save your valuable time.

The first and foremost benefit of tool belts wearing is that they organize plenty of tools in one place. They arranged the tools neatly according to tool sizes at their different pockets and slots. So, you can easily access the tools when necessary. You can consider tool belts as a “secondary hand”.

As tool belts can hold lots of tools, so you can carry various sizes of tools such as a hammer, chisel, screwdrivers, tape chain, markers, nails, and many more. If you store a sharp tool in your pant or shirt pocket it will poke you. But the tool belt can hold these tools without any prodding.

One of the other benefits of wearing a tool belt is that it saves your time. If you work in height and nonstop climb up and down to retrieve tools it will waste your time. Tool belts eliminate this problem and help you work harmoniously and efficiently. So, there are many benefits to wear tool belts.

Step-by-step Guides On How To Wear A Tool Belt

Actually, tool belt wearing includes tool belt’s orientation, tools organizing, and belt wearing. All these things are discussed below.

Step 1: Buy A Tool Belt With Required Features

You need to take a tool belt having the best features. It should come with comfy back support, plenty of tools storing capacity, lightweight, and much more. Some tool belts such as the Gatorback tool belt will give you maximum comfort than others.

Certainly, you need lots of pockets, tool holders, and slots to store various tools. You need hand tools, fastener tools, power tools, and sometimes special tools for doing your jobs. The tool belt should come with all these facilities, especially which type of jobs you want to achieve with it.

You must look for the great leather tool belt, as it is the most durable option. Also, you need to look at the fastening style, handles, suspender rings, adjustability, and all other important facts.

Step 2: Check The Tool Belt Before Each Use

It is important to inspect the tool belt before clothing. They become dirty after using them for a few days. As dirty belts don’t provide comfy to wear, so you should clean them before putting on. Sometimes they might get damaged also. In this case, you need to repair them.

For safety reasons, you need to inspect the buckles whether they work or not. You should also take a close look at the pouches. If you find any holes there, don’t use them without repairing the faults.

Step 3: Organizing The Tool Belt and Pouches

When buying the belt, make sure the belt suits you. Whether you are a right or left-handed man, your belt should perform according to your styles. If you are a right-handed man, the buckle should be on the left side and the main pouch should have on the right side.  For a left-handed man, the orientation will be vice-versa.

There are a few models, which will allow you to shift the tool pouches. If you belong to this type, it is recommended to reposition the tool pouches according to your assistance. For three pouches tool belt, you need to set up the middle bag in a good manner so that it couldn’t disturb you.

Step 4: Main Tools At First Hand and Auxiliary Tools in Opposite Side

All the tools are not equally important for contractors. You must prioritize them and organize according to their necessities. The tools needed frequently should be kept on the primary side and the less important tools should store at secondary hand. It will help you to access the necessary tools easily.

Few primary tools for tool belt are claw hammer, chalk line, carpenter’s pencil, and pen, utility knife, lineman pliers, etc. Some of the secondary tools for tool belt include nail sets, screws, 4-in-1 screwdriver, cold chisel, speed square, torpedo level, electrical tape, and much more.

Due to variations of works, primary and secondary tools lists may vary. For example, for their tool belts, electricians would favor voltage tester, screwdrivers, pliers on the primary side and power drills, scissors, knockout set, etc. are on the secondary side.

A hammer, nails, pencils, chisels, hand saws, speed square are few basic tools for carpenters, whereas sliding bevel, level, etc. are few secondary tools.

Step 5: Don’t Carry Extra Tools

We always say not to take lots of tools that may create back pain. So, you need to be choosey to take tools. Make sure, you are not carrying weights more than the manufacturers’ approvals.

Step 6: Make Your Hands Free At Climbing or Working in Height

When you climb in the ladder or work in height, you need to hold the ladder or any solid support. In this case,  free up your hands are essentials. If your hands are full of tools, you can’t grab correctly the ladder and may fall down and get injured severely.

While climbing, don’t carry any tools at hand, only take the vital ones in pouches. A wristband might be helpful for carrying small tools in ladder climbing.

Step 7: Consider Change of Mass Centre

This is another consideration before wearing a tool belt. As pro workers have to work in variable changing positions, so the center of gravity of the tool belts deviates from one to another. So, you need to set up the pouches and tool holders in a way so that you can easily swap the tools and make balancing of tools weight center.

Some users love to rotate the belt and align the facts. But, you need to shift the tools occasionally and make a balance of the mass center, especially when working in tilt as roofers do often. Working on a ground like doing a framing work wearing tool belts, also requires some balancing to do.

Step 8: Overturn The Belts Occasionally

Sometimes inversion of tool belt is important. This will allow you to get near the tools that are on the opposite side. If the belt has the ability to overturn, it will allow you to bend it quickly and easily which is helpful for long-time working. This type of belt twisting will increase comfortably doing your task.

Step 9: Properly Wear The Belt

Are you ready to put on the belt? Well, putting on a tool belt is not very special. It’s like wearing a regular belt. Just lock the belt by the strong buckle. Make sure, the fitting is not very tight or too loose. Bear in mind, fit belt boosts up users’ comfortability equals to overall performance.

Step 10: Fine Tunning

After wearing the belt, make sure the handles, suspender rings are outside the belt. If they lay down under the belt, it may feel discomfort to you. Take them out and start working with the tool belt. Congratulations for putting on the belt successfully.

When Tool Belt Suspenders Are Necessary?

If you are a professional contractor then you need to carry lots of tools in your tool belt, which makes the belt heavy naturally. So, it may create stains on your backbone and nearby waist area. If you continuously do that it will impact greatly on your body.

Don’t worry, every problem comes with a solution. You can resolve this problem by installing suspenders with the tool belt. Suspenders distribute the weight evenly throughout the body, so extra weight doesn’t generate in the waist zone.

You can carry lots of loads connecting suspenders with tool belt for a long-time especially when you work in an inclined surface or height. They assist you to make your hands free during working or climbing period.

Without suspenders, the weight of tool pouches may rub in your hips and create discomfort to you. So it is recommended to invest in suspenders and get outstanding performance from them.

Step-by-step Guides On How To Wear Tool Belt With Suspenders

It’s not a big deal to put on a  tool belt suspenders. The steps include:

Step 1: Firstly, put on the tool belt and fasten it properly before adding suspenders with it.

Step 2: Attach the tool belt with suspenders to the back of your pants or trousers.

Step 3: Next, carry the suspenders tool belt through the back and the chest. It’s very important for suspender users to locate the braces, crossing the back and approaching back to the chest.

Step 4: Then, fasten the harness strap with the front of the trousers.

Step 5: If there is any extra chest strap fasten it also. It will prevent unnecessary movements of suspenders, especially in roofing with tool belts related jobs.

Step 6: After completing the attachment processes, check the suspenders fitting. If it’s not fit properly adjust the straps until fits perfectly.

Step 7: Finally, adjust the pockets and enjoy pain-less shoulder support suspenders.

How To Remove The Tool Belt and Suspenders

If you want to take away tool belt and suspenders, you need to start from the back of wearing processes. Firstly, make empty the suspenders slots and belt pouches carefully. You can use gloves to avoid poking of sharp tools. Then, detach the chest strap and the harness strap of suspenders.

After that, unlock the buckle of the tool belt from your waist. Finally, keep the belt and suspenders in a secure place or hang them in hangers.

Important Considerations of Wearing Tool Belts

  • Securely fit the belt by the buckle with grommets.
  • Never fit the belt too loose or tightly.
  • Organize the tools according to your job’s necessity.
  • Don’t overload the tool belt more than the stated limit.
  • Suspenders are recommended only for heavy loads carrying.
  • Clean and soften the belt set on a regular basis to get maximum performance.


Tool belts and suspenders are important gadgets for professional contractors. Wearing tool belts and suspenders is not a hard job but you need to acquire the skill first. As a pro tool belt user, you need to learn how to wear a tool belt and suspenders in a short period of time. Learning the tools organizing perfectly and tool belt detachment fast is also important.

We tried our level best to guide you regarding these issues by sharing our knowledge. It’s time for you to practice a lot and improve your skills. We believe you can do this successfully!

We will be happy to hear your thoughts

Leave a reply

Pin It on Pinterest

Share This
Tool Organized